What’s in the box?
- 1x Wyze Lock Keypad
- 1x Keypad Mounting Plate with Adhesive
- 2x AA Batteries
- 2x Screws
- 1x Philips Screwdriver or Power Drill
Wyze Lock Keypad Installation
- Remove the backing of the adhesive on the back of the Keypad Mounting Plate.
- Press the Keypad Mounting Plate against the wall in the location you want to install it.
- Use the included screws to secure the Keypad Mounting Plate to the wall.
- Remove the back panel of the Keypad.
- Insert the included batteries, and replace the back panel.
- Attach the Keypad to the mounting plate.
- Your Wyze Lock Keypad is now successfully installed!
Now that your Keypad is installed, check out our Keypad Setup Guide to get it connected to your Wyze Lock.